GS Traders » Products

10″ economy sintered continuous rim lapidary blade. 250 x 1.2mm

Greg Swinburne — Wed, 07 Jan 2015 01:00:44 +0000

10″ economy sintered continuous rim lapidary blade. 250 x 1.2mm and 25mm bore Diamond section is 1.2mm x 10mm

Good to use on glass or stone. These blades give a smoother cut than the toothed blades and will last up to five times longer.
Must be used wet.
Bushes are available for these blades for $4 extra.

12″ economy sintered continuous rim lapidary blade. 300 x 1.2mm

Greg Swinburne — Wed, 07 Jan 2015 01:04:07 +0000

12″ economy sintered continuous rim lapidary blade. 300 x 1.2mm and 25mm bore Diamond section is 1.4mm x 10mm

Good to use on glass or stone. These blades give a smoother cut than the toothed blades and will last up to five times longer.
Must be used wet.
Bushes are available for these blades for $4 extra.

16″ economy sintered continuous rim lapidary blade. 400x 1.2mm

Greg Swinburne — Sun, 26 Feb 2017 22:23:23 +0000

16″ economy sintered continuous rim lapidary blade. 400 x 1.2mm and 25mm bore Diamond segment is 10mm x 1.5mm.

Good to use on glass or stone. These blades give a smoother cut than the toothed blades and will last up to five times longer.
Must be used wet.
Bushes are available for these blades for $4 extra.

3″ diamond blades 75mm x 0.3mm, set of three

admin — Fri, 23 May 2014 00:04:46 +0000

75mm diamond coated blades, 10mm bore. 150 grit. 0.3mm thickness. These blades are for small hand held cutting tools, such as an air powered cut off tool. Suitable for glass, stone or ceramic. Must be used wet. The price is for a set of three.

6″ economy sintered continuous rim lapidary blade. 150mm x 0.8mm

Greg Swinburne — Tue, 20 Jun 2017 00:14:01 +0000

6″ economy sintered continuous rim lapidary blade. Core is 150mm x 0.4mm and 25mm bore Diamond section is 0.8mm x 6mm

Good to use on glass or stone. These blades give a smoother cut than the toothed blades and will last up to five times longer.
Must be used wet.
Bushes are available for these blades for $4 extra.

8″ economy sintered continuous rim lapidary blade. 200mm x 1.2mm

Greg Swinburne — Sun, 26 Feb 2017 22:59:15 +0000

8″ economy sintered continuous rim lapidary blade. Core is 200 x 0.9mm and 25mm bore Diamond section is 1.2mm x 10mm

Good to use on glass or stone. These blades give a smoother cut than the toothed blades and will last up to five times longer.
Must be used wet.
Bushes are available for these blades for $4 extra.